Ke Smart LED (Pack)

Hot
-40%
SMART LED 2SMART LED 2
SMART LED 2SMART LED 2
Smart LED IMG_1558Smart LED IMG_1558
Smart LED IMG_1557Smart LED IMG_1557

Ke Smart LED (Pack)

$4.95 $2.95

Ke Smart LED S1 is a special pixel LED module design for surface-lighting POF (Plastic Optical Fiber).
The LED is RGB Tri-color through hole LED, it’s water clear. The LED is controlled by a SMD WS2811S IC chip. So the Smart LED is also addressable like Ke Pixel Mini with the same single-wire control protocol (The data bitstream order is RGB.)….

SKU: A030104. Category: . Tags: , , .
  • Description
  • Additional Information
  • Reviews (0)

Product Description

Description


Ke Smart LED S1 is a special pixel LED module design for surface-lighting POF (Plastic Optical Fiber).
The LED is RGB Tri-color through hole LED, it’s water clear. The LED is controlled by a SMD WS2811S IC chip. So the Smart LED is also addressable like Ke Pixel Mini with the same single-wire control protocol (The data bitstream order is RGB.).

 

The through hole LED diameter is 5mm, it’s mounted paralleled with the PCB, and make it easy to be fixed with a POF filament. Ke Smart LED comes with a small pack, it includes:
1×Ke Smart LED S1
1×100mm Heat shrink tube
1×Plastic filament clip
1×A pair of tiny copper screw and nut.

We supply super-bright POF filaments, but not included in this pack.

IMG_0331 1024

With this pack, you can use POF filament with a diameter from 1mm ~ 3mm. The POF filament will be fixed tightly with the LED.

Because Ke Smart LED is controlled by IC, it can produce light with millions of different colors, the light then tranmit into the optical fiber, so the fiber filament will glow in millions of colors.
It’s very beautiful and it’s perfect to replace EL wires.

Many people like EL Wires, adding a lightning wire to your project will make it more attractive. But EL Wire has many weaknesses, firstly, the circuit to drive EL wire is complex, it needs an inverter and its optimum operating voltage is as high as 120V; What is worse, it creates high pitch sound because of the high frequency (1500-2000Hz) in the inverter. So there are a lot of noise when an EL wire is glowing.

Besides, an EL wire only has one color, on the contrast surface-lighting POF can glow in millions of colors and you can change it whatever you want.

When fixing the POF filament to the LED, please make sure that the end of the POF filament and the head spot of the LED be contacted, then use the heat shrink tube, the clip and screw to fix them together.

Features


  • Standard Ke Connector Port, Chainable design.
  • Built-in signal reshaping circuit, wave-form distortion does not accumulate.
  • Built-in electric reset circuit and power lose reset circuit.
  • Data rate is as high as 800Kbps.
  • High consistent color.

Specifications


  • Power supply: 3.3~5.5V
  • Current: 18.5mA
  • Operation temperature: -20~+70°C
  • Storage temperature: -55~+150°C
  • Data Rate: 800Kbps
  • PWM Rate: 400kHz

Additional Information

Weight 25 g
Dimensions 31 x 31 x 9.5 mm

Need help? Email Us Here! Chat With Us Now!

← Prev Step

Thanks for contacting us. We'll get back to you as soon as we can.

Please provide a valid name, email, and question.

Powered by LivelyChat
Powered by LivelyChat Delete History